Seasonal pattern of metal bioaccumulation and their toxicity on Sphagnum squarrosum

Present study was undertaken as an attempt to study the effect of pollutants on biological responses of Sphagnum growing at Kainchi, Kumaon hills (Uttranchal). Sphagnum plants of almost identical size, collected from the marked sites of Kainchi in different seasons viz., monsoon, winter, summer and again in monsoon, were analysed for chlorophyll, protein, shoot length and nitrate reductase and peroxidase activities. Maximum chlorophyll, protein, shoots length and nitrate reductase activities were observed during the monsoon while minimum in summers. The abundance of Sphagnum and two other bryophytes, Marchantia and Plagiochasma was also higher in monsoon than in other seasons. The study also indicated that Sphagnum has more bioaccumulation and tolerance potential for heavy metals than Marchantia and Plagiochasma.     

Translocation of metals and its effects in the tomato plants grown on various amendments of tannery waste: evidence for involvement of antioxidants

A field experiment was conducted to study the effect of different amendments of tannery sludge on physiological and biochemical parameters of tomato plant (Lycopersicon esculentum L. Mill). The accumulation of metals (Cr, Fe) in different parts of tomato plants grown on tannery sludge amended soil increased in a concentration and duration-dependent manner. The accumulation of both the metals was found lowest in the fruits of the plant. The statistical analysis of the results showed an increase in chlorophyll and protein contents in lower sludge amendment ratio at all exposures followed by a decrease at highest (100%) sludge amendment ratio. Lipid peroxidation enhanced in both root and leaves of sludge grown plants of tomato at all the sludge amendments and exposure periods, which is evidenced by increased malondialdehyde content, however the maximum increase was found in the roots (43.63%) and leaves (56.66%) of the plant grown on 100% tannery sludge at 60 d, over respective controls. The level of antioxidants, cysteine, non-protein thiol and ascorbic acid increased in the sludge grown plants of tomato to cope up with stress induced by the excess amount of the heavy metals present in the tannery sludge. The maximum increase was found in cysteine content (75.53% in the leaves), non-protein thiol content (92.68% in the roots) and ascorbic acid content (29.66% in the roots) of the plant at 75% tannery sludge after 30 d. The tomato plants were found well adopted for minimizing damage induced by reactive oxygen species, when grown on tannery sludge amendments in the present study.     

Prediction of flange wrinkling in deep drawing process using bifurcation criterion

Surface distortions in the form of wrinkles are often observed in sheet metals during stamping and other forming operations. Because of the trend in recent years towards thinner, higher-strength sheet metals, wrinkling is increasingly becoming a more common and troublesome mode of failure in sheet metal forming. The prediction and prevention of wrinkling during a sheet forming process are important issues for the design of part geometry and processing parameters. This paper treats the phenomenon of flange wrinkling as a bifurcated solution of the equations governing the deep drawing problem when the flat position of the flange becomes unstable. Hill’s bifurcation criterion is used to predict the onset of flange wrinkling in circular and square cup drawing. In particular, the maximum cup height that can be drawn without the onset of flange wrinkling is predicted for the given set of process parameters. A parametric study of the maximum cup height is also carried out with respect to various geometric, material and process parameters. Finite element formulation, based on the updated Lagrangian approach, is employed for the analysis. The incremental logarithmic strain measure, which allows the use of a large incremental deformation, is used. The stresses are updated in a material frame. The material is assumed to be elastic–plastic, strain hardening, yielding according to an anisotropic yield criterion of Barlat et al. (2005) [23] (named as Yld2004-18p). Isotropic power law hardening is assumed. Inertia forces are neglected due to small accelerations. Modified Newton–Raphson iterative technique is used to solve the nonlinear incremental equations.     

Mercury pollution in the Sonbhadra district of Uttar Pradesh,India, and its health impacts

The Sonbhadra district in the Singrauli area of Uttar Pradesh, India, has many coal mines and thermal power plants and is a critically polluted area. Many residents of this area reported adverse health conditions which may be linked to metal pollution, especially of mercury investigated here.

In May 2012, samples of water (23), soil (7), blood, hair, and nails from persons showing adverse health conditions selected at random were collected and analyzed for total mercury by atomic absorption spectrometry.

Twenty percent drinking water samples contained mercury from 3 to 26 μg L^?1 (3–26 times the permissible limit). Soil samples had 0.5–10.1 mg kg^?1 Hg.

The average concentrations of mercury in human blood, hair, and nails were found to be 34 μg L^?1, 7.4 mg kg^?1, and 0.8 mg kg^?1, respectively. Mercury concentrations in the blood of these persons were 45 and 28 μg L^?1 on average in the case of men and women. This is much higher than the safe level of 5.8 μg L^?1 set by the United States Environmental Protection Agency (USEPA).

It was concluded that all residents of Sonbhadra sampled could be suffering from mercury toxicity as the area is polluted by Hg released from the coal-fired thermal power plants.     

Rehabilitation of degraded community lands for sustainable development in Himalaya: a case study in Garhwal Himalaya,India

SUMMARY

An approach to the rehabilitation of degraded community lands built on people's perceptions and traditional knowledge was developed, implemented on a small scale (6 ha plot), and evaluated in terms of economic and ecological costs and benefits over a period of 5 years in a mid-altitude (1200 m) village of Garhwal Himalaya. Rehabilitation comprised establishment of water harvesting tanks, organic management of soil, agroforestry (native multipurpose trees t traditional crops), and decision making by the whole village community. Costs and benefits under irrigated and unirrigated conditions were compared. The total cost of establishing the irrigated agroforestry system was 1.23 fold that of the unirrigated one, whereas the total benefit was 2.09 fold. The average standing above-ground biomass of the 4-year-old plantation in the irrigated agroforestry system was 11.69 t/ha compared to 8.34 t/ha in the unirrigated system. Improvement in soil properties was more pronounced in the irrigated system than in the unirrigated one. Nutrient input, an input derived largely from forest biomass, in the unirrigated system was nearly 3 times higher than that in the irrigated system. It is concluded that, considering the local and national/regional/global interests in an integrated manner, agroforestry incorporating water management would be a more effective option for rehabilitating degraded community lands than the afforestation currently being attempted by the government in the mid-altitudes of Indian Himalaya.     

Isozyme, ISSR and RAPD profiling of genotypes in marvel grass (Dichanthium annulatum)

Genetic analysis of 30 accessions of marvel grass (Dichanthium annulatum Forsk.), a tropical range grass collected from grasslands and open fields of drier regions, was carried out with the objectives of identifying unique materials that could be used in developing the core germplasm for such regions as well as to explore gene (s) for drought tolerance. Five inter-simple sequence repeat (ISSR) primers [(CA)4, (AGAC), (GACA) 4; 27 random amplified polymorphic DNA (RAPD) and four enzyme systems were employed in the present study. In total, ISSR yielded 61 (52 polymorphic), RAPD 269 (253 polymorphic) and enzyme 55 isozymes (44 polymorphic) bands. The average polymorphic information content (PIC) and marker index (MI) across all polymorphic bands of 3 markers systems ranged from 0.419 to 0.480 and 4.34 to 5.25 respectively Dendrogram analysis revealed three main clusters with all three markers. Four enzymes namely esterase (EST), polyphenoloxidase (PPO), peroxidase (PRX) and superoxide dismutase (SOD) revealed 55 alleles from a total of 16 enzyme-coding loci. Of these, 14 loci and 44 alleles were polymorphic. The mean number of alleles per locus was 3.43. Mean heterozygosity observed among the polymorphic loci ranged from 0.406 (SOD) to 0.836 (EST) and accession wise from 0.679 (1G3108) to 0.743 (IGKMD-10). Though there was intermixing of few accessions of one agro-climatic region to another largely groupings of accessions were with their regions of collections. Bootstrap analysis at 1000 iterations also showed large numbers of nodes (11 to 17) having strong clustering (> 50 bootstrap values) in all three marker systems. The accessions of the arid and drier regions forming one cluster are assigned as distinct core collection of Dichanthium and can be targeted for isolation of gene (s) for drought tolerance. Variations in isozyme allele numbers and high PIC (0.48) and MI (4.98) as observed with ISSR markers indicated their usefulness for germplasm characterization.     

Transferability of STS markers in studying genetic relationships of marvel grass (Dichanthium annulatum)

Transferability of sequence-tagged-sites (STS) markers was assessed for genetic relationships study among accessions of marvel grass (Dichanthium annulatum Forsk.). In total, 17 STS primers of Stylosanthes origin were tested for their reactivity with thirty accessions of Dichanthium annulatum. Of these, 14 (82.4%) reacted and a total 106 (84 polymorphic) bands were scored. The number of bands generated by individual primer pairs ranged from 4 to 11 with an average of 7.57 bands, whereas polymorphic bands ranged from 4 to 9 with an average of 6.0 bands accounts to an average polymorphism of 80.1%. Polymorphic information content (PIC) ranged from 0.222 to 0.499 and marker index (MI) from 1.33 to 4.49. Utilizing Dice coefficient of genetic similarity dendrogram was generated through un-weighted pairgroup method with arithmetic mean (UPGMA) algorithm. Further, clustering through sequential agglomerative hierarchical and nested (SAHN) method resulted three main clusters constituted all accessions except IGBANG-D-2. Though there was intermixing of few accessions of one agro-climatic region to another, largely groupings of accessions were with their regions of collections. Bootstrap analysis at 1000 scale also showed large number of nodes (11 to 17) having strong clustering (> 50). Thus, results demonstrate the utility of STS markers of Stylosanthes in studying the genetic relationships among accessions of Dichanthium.